Irontech Repair Kit

The Repair Kit by Irontech Doll allows to fix injuries in love dolls.

This is a complete sex doll repair kit designed for silicone products, featuring high-quality repair glues, AB gel for reshaping, stain remover, cleaning oil, and essential tools like syringes and cotton swabs. Perfect for addressing damages, deformation, and stains with precision and ease.

Repair Glue - Silicone 30ml

* Clean the damaged area thoroughly, ensuring it is free of debris.
* Use an appropriate tool or a cotton swab to apply glue to the damaged spot.
* Carefully wipe away excess glue from the surface, not disturbing the applied glue layer.
* Let it sit for 6–8 hours, then check if the damage has been repaired.

Nail Glue - For Silicone 10ml

* Clean the area where the nail will be applied, ensuring it is clean and dry.

* Remove the cap from the nail glue.
* Carefully apply glue to the nail application area, ensuring moderate glue usage.
* Attach the nail and press lightly for 30 seconds.

Note: Avoid excessive pressure on the nail and fingers to prevent tension between the nail and the silicone, which may cause detachment.

AB Gel - For Gel Breasts or Buttocks Deformation 100ml

* Prepare an empty cup, cleaning oil, and a syringe set.
* Note: The needle is very sharp; handle it carefully to avoid injury.
* Pinch the nipple with your fingers and slowly insert the needle deep into the nipple.
* After insertion, gently use the needle to separate the gel section from the skin to create a cavity, ensuring a smooth injection process.
* Repeat steps 2 and 3 to create a cavity in the other breast.
* Firmly connect the syringe needle to the tube to prevent detachment.
* Use a cup to thoroughly mix Gel A and Gel B in a 1:1 ratio.
* Note: The gel must be stirred evenly and injected promptly after mixing, as it will solidify quickly.
* Fill the syringe with the mixed gel, connect it to the needle using the tube, and begin the injection, holding the connection firmly.
* Note: Adjust the needle position during the injection to ensure even gel distribution.
* After the injection, remove the needle and clean the syringe parts with cleaning oil to prevent clogging.

Stain Remover 15g

* Use cleaning oil to clean the stained area thoroughly.
* Evenly apply the stain remover to the stained area.
* Let it sit for 8 hours, during which most stains will be removed.
* Clean the surface again with cleaning oil.

Note: The effectiveness of the stain remover may vary depending on the type of stain. Multiple applications may be required based on the actual situation.

Cleaning Oil 100ml

* Can be applied directly to stains for wiping clean, or a cleaning cloth soaked in cleaning oil can be used to wipe the stains.
* Note: Keep the bottle sealed to prevent the cleaning oil from evaporating.

Other included accessories

* Syringe Set
* Cotton Swabs
* Cleaning Cloth
* Repair Kit Instructions